U.S. and World News
:
Computing
:
Networks and Encryption
News
CorEdge Networks Demonstrates Major Advances in AMC, ATCE and MicroTCA Products and Systems at SUPERCOMM 2005
Mon, 06 Jun 2005, 15:16:00 EDT
SAN RAMON, Calif. - SUPERCOMM 2005 - June 6 (SEND2PRESS NEWSWIRE) -- CorEdge Networks, Inc., will continue its dramatic product and technology innovation by demonstrating numerous industry-first working AdvancedTCA (ATCA) and MicroTCA products at SUPERCOMM 2005, held June 7-9, 2005, in Chicago's McCormick Place. CorEdge products will be showcased in the PCI Industrial Computer Manufacturers Group (PICMG) pavilion (booth #43085). Additionally, a number of firms participating in the show will demonstrate CorEdge products in conjunction with their own ATCA and MicroTCA products. CorEdge also participated in PICMG's ATCA Interoperability Workshop (AIW) #11 the week prior to the show.
"CorEdge Networks is pleased to support PICMG and the MicroTCA committee by helping to move MicroTCA from concept to working prototype," said William Chu, CorEdge Networks President. "Our product demonstrations at SUPERCOMM 2005, developed in close collaboration with the MicroTCA committee and numerous third party sub-system component vendors, showcase the breadth of options and capabilities available to service providers in meeting their next generation network needs and applications."
CorEdge will demonstrate the following products at SUPERCOMM 2005: the world's first MicroTCA virtual carrier manager (VCM), 1Gbps and 10Gbps (gigabit-per-second) reprogrammable AdvancedMC (AMC) modules, and an ATCA reprogrammable cutaway carrier card. The CorEdge VCM and AMC modules will be integrated into various MicroTCA prototype systems, including the "cube," 75mm and 150mm versions. The CorEdge AMCs and ATCA carrier card will be demonstrated in a 2U ATCA-based Gigabit Ethernet (GigE) switch.
CorEdge Networks MicroTCA Virtual Carrier Manager (VCM) - A critical component of the MicroTCA concept is the CorEdge MicroTCA VCM-another industry first, built specifically for SUPERCOMM 2005 at the request of the MicroTCA committee. The CorEdge VCM is a single-width, extended full-height AMC, based on existing CorEdge AMC technology and uses new B+ connector technology. It acts as a Layer-2 unmanaged 8-port Ethernet switch, with seven GigE channels supporting seven AMCs on the MicroTCA backplane and one GigE I/O uplink channel on the VCM faceplate. The on-board switch is a non-blocking, low-latency base channel switch. In cooperation with numerous third-party vendors of MicroTCA subsystem components, including chassis, connectors, backplanes, and power systems, the CorEdge VCM will be demonstrated in the 75mm, 150mm, and cube MicroTCA chassis. Future releases will support fat-pipe switching, IPMI (Intelligent Platform Management Interface) and other management features, and will conform to MicroTCA standards.
CorEdge Networks 1Gbps and 10Gbps Reprogrammable AdvancedMC (AMC)-CorEdge will demonstrate another industry first, its 10Gbps AMC. Both the 1Gbps and 10Gbps versions of the CorEdge AMC are based on its proprietary Communications Engine that serves as a high performance platform with programmable flexibility to support a variety of interfaces on the line side, mezzanine/chip-to-chip, and backplane side. The CorEdge Communications Engine enables a single solution to be configured to support multiple interfaces and to switch multiple protocols, depending on customer requirements. CorEdge will be demonstrating its low-latency, wire-speed 1GigE and 10GigE AMCs in its MicroTCA and ATCA systems.
CorEdge Networks ATCA Reprogrammable Cutaway Carrier Card-CorEdge will be demonstrating an improved version of its industry-first ATCA reprogrammable cutaway carrier card with additional IPMI support of the Shelf Manager and AMC modules. At AIW11 last week, CorEdge tested form, fit, initial power-up, and management functionality with third-party AMCs. At the show, CorEdge will demonstrate interoperability between its carrier card with third party and CorEdge AMCs. The CorEdge carrier card maximizes flexibility for ATCA applications by supporting multiple protocols, AMCs from multiple vendors, and multiple AMC form factors, including full or extended-height and single or double-width.
CorEdge Networks MicroTCA System-CorEdge will demonstrate the world's first single-port 10GigE and multi-port 1GigE MicroTCA prototype system. This prototype MicroTCA system will highlight the flexibility of MicroTCA and CorEdge products by integrating the CorEdge MicroTCA VCM, 1Gbps and 10Gbps AMCs into a prototype Ethernet switch.
CorEdge Networks 2U ATCA System-CorEdge will demonstrate a 2U, 2-slot, ATCA-based low-latency 16-port GigE switch. This system has two slots, with each slot populated with a CorEdge carrier card. One carrier card is configured to support third-party AMC processors and illustrate multi-vendor support by the CorEdge carrier card. One carrier card is configured to support four CorEdge AMCs, with each AMC configured to support four 1GigE ports. This Ethernet switch delivers less than 5 microsecond latency and offers AMC/ATCA capabilities in a compact, high-performance switch that is ideal for telecom and enterprise applications.
About CorEdge Networks
CorEdge Networks is a leading supplier of IP/chips, sub-system and system-level products. Through its dynamically programmable Multi-Protocol Communications Engine, Multi-Protocol Switch Fabric, and advanced digital and mixed-signal technologies, the company develops and markets networking products that enable high performance, scalable, flexible, reliable and cost-effective solutions for ATCA, MicroTCA, HPC and Data Center applications.
More information: www.coredgenetworks.com.
NEWS SOURCE: CorEdge Networks
Send2Press® is the originating wire service for this story.
» Read More Networks and Encryption News
» Other Send2Press Industry News by Category
More Information and Media Contact:
For questions about this story, contact the news source:
»
Click Here for Contact Information
THE CONTENT OF THE ABOVE NEWS STORY WAS PROVIDED BY THE NEWS SOURCE WHO IS SOLELY RESPONSIBLE FOR ITS ACCURACY. FOR QUESTIONS ABOUT THIS STORY CONTACT THE NEWS SOURCE AND NOT SEND2PRESS (THIS WEBSITE).
O T H E R R E S O U R C E S
T E R M S O F U S E
This article is Copr. © 1983-2008 Neotrope / Send2Press. Reproduction of this news article version requires written authorization. You may freely link to this article. Journalists (see the section "Journalist Resources" above) may use orig. news release as the basis for an article.
News Websites may republish the "news release" text version linked to above under "Journalist Resources" except must retain "Send2Press Newswire" as the source of this news if used verbatim. Websites which offer/sell PR or newswire services, or web promotion services, or "splogs" may NOT reprint our content in ANY form. Send2Press Newswire is a service mark of, and "Send2Press" is a registered trademark of, Neotrope. Creative Commons - Some Rights Reserved (3.0) - Attribution Required.
DISCLAIMER: the above article is believed accurate but not guaranteed, and is based on business news supplied by the source (CorEdge Networks). The noted source is solely responsible for its accuracy. Financial/Stock news may contain forward looking statements. Neotrope/Send2Press makes no claims of accuracy or suitability for any purpose. Any opinions expressed by representatives of company(s) mentioned in news and profiles are solely those of the person indicated, and do not reflect any opinion or policy of Neotrope or Send2Press. Your use of any information contained herein is done solely at your own risk, and you are fully responsible for using any information herein, or on sites mentioned or linked to in the article. All trademarks acknowledged.
REFERENCES: CorEdge Networks Demonstrates Major Advances in AMC, ATCE and MicroTCA Products and Systems at SUPERCOMM 2005, CorEdge Networks, SUPERCOMM 2005, AdvancedTCA (ATCA) and MicroTCA products, PICMG's ATCA Interoperability Workshop, Chicago's McCormick Place, William Chu, 1Gbps and 10Gbps (gigabit-per-second) reprogrammable AdvancedMC (AMC) modules, CorEdge Networks MicroTCA Virtual Carrier Manager, GigE I/O uplink, ATCA-based Gigabit Ethernet (GigE) switch, Jun 6, 2005.
VIEWED BY MEDIA (and public): 5109 times (1 today, 1 this week,
12 this month, 629 this year)
|
|
|
Subscribe in a reader
PLAIN TEXT FORMAT (UTF-8)
PDF FORMAT
