Send2Press Newswire
:
Computing
:
Hardware and Peripherals
News
CorEdge Networks Introduces Industry's First Freescale Coldfire Based AdvancedMC Module Management Controller Reference Design
Tue, 17 Jun 2008, 14:06:16 EDT
BOSTON, Mass., June 17 (SEND2PRESS NEWSWIRE) -- At the NXTComm show in Las Vegas, NV from June 17-19, 2007 (booth # SL5909I), CorEdge Networks will be demonstrating the industry's first Freescale ColdFire AdvancedMC (AMC) based Module Management Controller (MMC) reference design (CEN-MMC-F5212). This design has already been selected and implemented by Freescale for a number of Freescale's AMC reference designs for use in applications such as WiMAX base stations, IPTV and IP Video Conferencing.
 The CEN-MMC-F5212 is a complete solution that includes a MMC hardware design reference schematic, bill of material and various firmware licensing options. Based on a Freescale ColdFire5212 32-bit microcontroller, the CEN-MMC-F5212 is a field-tested, fully compliant design ideal for MicroTCA/ATCA Carrier applications that require intelligently managed AMC. This cost effective and compact package supports the most challenging budget and space constrained AMC designs.
When the CEN-MMC-F5212 is developed using with the CorEdge Networks 1U PicoTCA platform (CEN-PICO-1US), AMC designers have an efficient, convenient and cost effective AMC hardware, software and firmware development with integrated chassis, cooling, power and IPMI controller and management debug tools.
Architecture Overview
The CEN-MMC-F5212 hardware design leverages a Freescale ColdFire5212 32-bit microcontroller with support for local persistent storage device (EEPROM), temp/voltage sensors, GA resistors, LED drivers, watchdog timer, JTAG and hot swap microswitch. The entire MMC operates completely on +3.3V MP, consuming 0.3W maximum.
The CorEdge Networks MMC firmware meets the PICMG and Intelligent Platform Management Interface (IPMI) AMC specifications. This solution has been verified in ATCA and MicroTCA systems by third party testing software and at multiple PICMG sponsored Interoperability Workshops. Both CorEdge Networks and Freescale designed AMCs leverage the CEN-MMC-F5212.
Customizable Board Support Package
The CEN-MMC-F5212 also provides a board support package (BSP) to enable board-level customization for AMCs. Examples of customization options include:
* Custom AMC payload device control and interface
* Custom power sequencing with different voltage levels
* Custom FRU information and control command support
* Custom alternate/additional temp/voltage sensors
* Custom E-Keying support
About CorEdge Networks
CorEdge Networks is a leading supplier of ATCA/MicroTCA/AMC/IPMI standards compliant systems and infrastructure products, including the industry's first MicroTCA Carrier Hub (MCH), 10GbE MCH, MicroTCA Power Module, PicoTCA development platform, 10Gbps and 20Gbps Cavium and FPGA-based AMCs and full ATCA Cutaway Carrier. CorEdge Networks customers include a number of leading telecom, military and embedded systems companies. CorEdge Networks works closely with its customer to develop customized solutions.
For more detailed information on CorEdge Networks products, see www.coredgenetworks.com.
CorEdge Networks MicroTCA Products
CorEdge Networks' MicroTCA product line includes boards as well as test/development systems. At the board level, CorEdge Networks produces the industry's only standards-compliant MicroTCA Carrier Hub (MCH), which provides management of a MicroTCA chassis and up to 12 AMCs, and supports various networking and clocking functions. The CorEdge Networks MCH currently supports one of three different clock modules that enable Telco, PCI-Express or GPS/WiMAX applications. Fabric MCH modules will support 10GbE, PCI-Express or SerialRapidIO 'fat pipe' switching. The MCH interoperates seamlessly with CorEdge's Power Module, which provides MicroTCA power management/distribution.
To support MicroTCA system developers, CorEdge Networks has produced the industry's low cost series of ultra-small form-factor PicoTCA systems. The CEN-PICO-1US is a complete "standalone" AMC and MicroTCA Test and Development System that provides engineers and system designers with a cost-effective tool to aid in the development, design, debug and test of AMC and MicroTCA systems. It includes a System/Power Controller that enables users to quickly "bring up" AMCs in a MicroTCA-like environment to facilitate AMC development. The Pico 1US is extremely compact, measuring 13.0" (w) x 8.0" (d) x 1.75" (h) [1U].
All trademarks acknowledged.
NEWS SOURCE: CorEdge Networks
Send2Press® is the originating wire service for this story.
» Read More Hardware and Peripherals News
» Other Send2Press Industry News by Category
More Information and Media Contact:
For questions about this story, contact the news source:
»
Click Here for Contact Information
THE CONTENT OF THE ABOVE NEWS STORY WAS PROVIDED BY THE NEWS SOURCE WHO IS SOLELY RESPONSIBLE FOR ITS ACCURACY. FOR QUESTIONS ABOUT THIS STORY CONTACT THE NEWS SOURCE AND NOT SEND2PRESS (THIS WEBSITE).
O T H E R R E S O U R C E S
T E R M S O F U S E
This article is Copr. © 1983-2008 Neotrope / Send2Press. Reproduction of this news article version requires written authorization. You may freely link to this article. Journalists (see the section "Journalist Resources" above) may use orig. news release as the basis for an article.
News Websites may republish the "news release" text version linked to above under "Journalist Resources" except must retain "Send2Press Newswire" as the source of this news if used verbatim. Websites which offer/sell PR or newswire services, or web promotion services, or "splogs" may NOT reprint our content in ANY form. Send2Press Newswire is a service mark of, and "Send2Press" is a registered trademark of, Neotrope. Creative Commons - Some Rights Reserved (3.0) - Attribution Required.
DISCLAIMER: the above article is believed accurate but not guaranteed, and is based on business news supplied by the source (CorEdge Networks). The noted source is solely responsible for its accuracy. Financial/Stock news may contain forward looking statements. Neotrope/Send2Press makes no claims of accuracy or suitability for any purpose. Any opinions expressed by representatives of company(s) mentioned in news and profiles are solely those of the person indicated, and do not reflect any opinion or policy of Neotrope or Send2Press. Your use of any information contained herein is done solely at your own risk, and you are fully responsible for using any information herein, or on sites mentioned or linked to in the article. All trademarks acknowledged.
REFERENCES: CorEdge Networks Introduces Industry's First Freescale Coldfire Based AdvancedMC Module Management Controller Reference Design, CorEdge Networks, MicroTCA Products, NXTComm show in Las Vegas, Freescale ColdFire AdvancedMC Module Management Controller, Jun 17, 2008.
VIEWED BY MEDIA (and public): 1391 times (9 today, 66 this week,
327 this month, 1391 this year)
|
|
|
Subscribe in a reader
PLAIN TEXT FORMAT (UTF-8)
PDF FORMAT
