PRESS RELEASE:

Teenage entrepreneur-led Bulldog Lighting leading the push for California legislators to pass proposed 'Made in the USA labeling' bill

| From
entrepreneur Dylan Sievers

SAN CARLOS, Calif., April 26, 2013 (SEND2PRESS NEWSWIRE) -- A current law states that California businesses cannot claim their products are "Made in the USA" unless 100 percent of the components are manufactured in the country. The federal standard is 75 percent, which places an unfair disadvantage on California firms because there are some products that have components which are not available in the United States. Bulldog Lighting - a San Carlos, Calif.-based firm that was founded by teenage entrepreneur Dylan Sievers - is spearheading and promoting the passage of legislation that would make the 75 percent federal standard applicable in California.

Adopted by freshman Senator Jerry Hill, SB 661 will be discussed in the state senate on May 7. The passage of SB 661 would update California's "Made in USA" labeling standard.

"California's current 'Made in USA' labeling standard (of 100 percent) is unrealistic for certain companies that make products with many components, some of which are not manufactured in the U.S.," said the 19-year-old Sievers, who hatched the idea for Bulldog Lighting, which makes off road LED light bars for off-road vehicles, while in a business class at Serra High School when he was a 17-year-old senior. "Since the federal government and the rest of the states use a 75 percent standard. California companies are at an extreme disadvantage. Consumers and companies alike take pride in products that are manufactured in the United States, and it is only fair that businesses in California have a level playing field with competitors in other states."

At 17, Sievers was inspired to develop an off road LED light bar for the team's off-road vehicle when he was competing in a desert off-road race. Off road LED light bars produced by what is now Bulldog Lighting's main competitor were geared for a more affluent customer. "Why not make a high quality LED light bar that is affordable to the majority of off-road enthusiasts?" Sievers asked.

Bulldog Lighting projects in excess of $1 million in its first year of business. The company has three patents that are pending. It has spent the last six months in research and development, and identifying supply sources from U.S. companies to produce its off road LED light bar for off-road vehicles.

Approximately 80 percent of Bulldog Lighting's components derive from American companies, Sievers said. LEDs are not available in the United States, so Bulldog Lighting has no choice but to purchase those outside the country. Bulldog Lighting - which is operated by the Sievers and his parents Lisa and Steve Sievers (who also own an electrical contracting firm) - believes in the importance of "Made in the USA" pride, so the company considered moving production to Texas, where it could use "Made in the USA" on its packaging.

"We decided to remain here (in northern California) because this is home, and we believe it is important to make a difference and help ourselves and every California business by helping pass SB 661 and getting a 'Made in the USA' certification process established," Lisa Sievers said. "There are certification procedures for minority-owned businesses and women-owned businesses (of which Bulldog Lighting is since Lisa Sievers and Sarah Silvestre are company principles).

"Creating a certification process for the 'Made in the USA' claim is critical because consumers deserve to know that companies making that statement actually exceed the 75 percent federal standard," Sievers added. "Some companies make this claim but actually have their products made outside of the country and just assembled in the United States."

Before getting the certification process established, Dylan Sievers is fully focused on helping push the passage of SB 661. Teenage Sievers was astonished at the diminishing number of products that are currently manufactured in the United States, and especially California. Bulldog Lighting contacted Senator Hill, and he introduced the bill. Dylan Sievers is encouraging California residents to contact their local senator and urge them to pass the bill. Reach out to your senator at http://findyourrep.legislature.ca.gov/ .

"We are striving to have every single component for our off road LED light bar from U.S.-based companies, but until items used in our product that are not currently available here actually become available in the U.S., we have no choice but to go outside the country," Sievers said. "Yet we make sure that we use every component that is in our product that is made in the U.S.

"We can prove that we exceed the 75 percent federal standards," Sievers added. "We believe that, first, SB661 should be passed so California companies have the same advantages as businesses in every other state regarding the 'Made in the USA' statement. Then we are devoted to getting the 'Made in the USA" certification process enacted so consumers can have the utmost confidence that they are buying products that meet or exceed the 75 percent federal standards."

For more information please visit: http://www.bulldog-lighting.com/ .

News Source:
MORE INFORMATION:
For more information regarding this press release, please visit:
http://www.bulldog-lighting.com/
Like, Share, Save this press release:
  TWEET   SHARE   G+   PIN IT   STUMBLE   LinkedIn   Instapaper   Buffer

PERMALINK:
https://www.send2press.com/newswire/Teenage-entrepreneur-led-Bulldog-Lighting-leading-the-push-for-California-legislators-to-pass-proposed-Made-in-the-USA-labeling-bill_2013-04-0426-003.shtml
Shortlink to this press release: http://goo.gl/8t5wX
  LEGAL NOTICE AND TERMS OF USE:  
The content of the above press release was provided by the “news source” (Bulldog Lighting) or authorized agency, who is solely responsible for its accuracy. Send2Press® is the originating wire service for this story and content is Copr. © 2013 Bulldog Lighting with newswire version Copr. © 2013 Send2Press (a service of Neotrope). All trademarks acknowledged.

Rights granted for reproduction by any legitimate news organization. However, if news is cloned/scraped verbatim, then original attribution must be maintained with link back to this page as “original syndication source.” Resale of this content for commercial purposes is prohibited without a license. Reproduction on any site selling a competitive service is also prohibited. Information is believed accurate, as provided by news source or authorized agency, however is not guaranteed, and you assume all risk for use of any information found herein/hereupon. This work is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported License.
STORY READS for this single page only, as of Sep 29 2016:
[ count retired 8.4.16 ]


back to top
REFERENCES: entrepreneur Dylan Sievers, Made in USA, Bulldog Lighting, freshman Senator Jerry Hill, SB 661, entrepreneur Dylan Sievers, Made in USA labeling standard, off road LED light bar , news, press release from Bulldog Lighting, Apr 26, 2013, Ballots, Bills and Laws, Automotive, Electronics, San Carlos, California, Teenage entrepreneur-led Bulldog Lighting leading the push for California legislators to pass proposed 'Made in the USA labeling' bill