LRM Industries Introduces HydroDome, the Next BIG Thing in Stormwater Management BMPs

| From

ROCKLEDGE, Fla. (SEND2PRESS NEWSWIRE) -- LRM Industries International, Inc. headquartered in Rockledge, Florida, announces the introduction of the game-changing HydroDome™ family of stormwater chambers. LRM will show HydroDome for first time from August 18th through the 20th at StormCon®, the annual stormwater conference to be held this year at the Marriott in Anaheim, California.

The HydroDome™ design concept comes from both the efficiency of nature and the ageless understanding by architectural engineers, that the dome is stronger than an arch or vaulted tunnel. The HydroDome project at LRM was initially code-named "Beehive" with a goal of achieving extremely high space utilization efficiency, with high strength. This morphed into a domed cell structure to retain the natural field "nesting" efficiency, while adding incredible strength.

The HydroDome family of products will be reinforced thermoplastic composite structures, not simple thermoformed or injection molded thermoplastics, or high VOC non-recyclable thermosets, which are dangerous to our environment.

Said Jim Callough, CEO of LRM Industries International, Inc., "With LRM's patent pending STF Sheetless ThermoForming process, announced in October 2008, an incredible amount of options are enabled which did not exist before. We don't have to buy sheet, as we 'coat' the mold directly from extrusion. This opens a whole new world of versatility, and we can have closed loop recycling by reprocessing all trim in-house."

Callough added, "All HydroDome family products will have this same domed cellular (beehive) design. This allows a highly efficient 'nested' installation, dramatically reducing land utilization and all associated costs such as excavation, stone and other materials."

At StormCon® in booth #912, LRM will exhibit the HydroDome™ 550 as the first product in the new family of stormwater structural BMPs.

Company Information

LRM Industries International, Inc. was established to commercialize TPF ThermoPlastic Flowforming™ technology, a radically different and award-winning process technology for producing large, feature-rich, long-fiber reinforced thermoplastic composite parts in one fully automated molding operation. With the TPF ThermoPlastic Flowforming and STF Sheetless ThermoForming™ technologies, LRM enables innovative applications and designs in the use of plastics and thermoplastic composites to produce very large unitary structures where, to-date, it has been viewed as cost prohibitive or lacking in strength and structural integrity.

For more information, visit .

Jim Callough
of LRM Industries International, Inc.

All referenced product names, and other marks, are trademarks of their respective owners.

News Source:
Like, Share, Save this press release:
  TWEET   SHARE   G+   STUMBLE   LinkedIn   Instapaper   Buffer

The content of the above press release was provided by the “news source” (LRM Industries International, Inc.) or authorized agency, who is solely responsible for its accuracy. Send2Press® is the originating wire service for this story and content is Copr. © 2009 LRM Industries International, Inc. with newswire version Copr. © 2009 Send2Press (a service of Neotrope). All trademarks acknowledged.

Rights granted for reproduction by any legitimate news organization. However, if news is cloned/scraped verbatim, then original attribution must be maintained with link back to this page as “original syndication source.” Resale of this content for commercial purposes is prohibited without a license. Reproduction on any site selling a competitive service is also prohibited. Information is believed accurate, as provided by news source or authorized agency, however is not guaranteed, and you assume all risk for use of any information found herein/hereupon. This work is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported License.
STORY READS for this single page only, as of Oct 24 2016:
[ count retired 8.4.16 ]

back to top
REFERENCES: hydrodome stormwater chambers, stormcon stormconference, LRM Industries International Inc, reinforced thermoplastic composite structures, stormwater structural BMPs, TPF ThermoPlastic Flowforming and STF Sheetless ThermoForming, stormcon stormwater conference, HydroDome 550, CEO Jim Callough, news, press release from LRM Industries International, Inc., Aug 13, 2009, Plastics and Chemicals, , , , , LRM Industries Introduces HydroDome, the Next BIG Thing in Stormwater Management BMPs