Advantage Trim and Lumber Company Warns Against the Use of Composite Decking Materials
Wed, 24 Jun 2009, 18:08:31 EDT — Edited by Debra Tone
BUFFALO, N.Y. (SEND2PRESS NEWSWIRE) -- Advantage Trim & Lumber Company today announced that, due to recent inquiries from customers, composite decking supplies and materials will not be distributed or sold at any of our locations. While composite decking remains popular due to its low cost, we are of the opinion that using composite materials for decks is a hazard to the public.

Syntec Optics Gains ISO 9001:2000 Certification
Tue, 23 Jun 2009, 07:59:20 EDT — Edited by Carly Zander
PAVILION, N.Y. (SEND2PRESS NEWSWIRE) -- Syntec Optics, the largest independent manufacturer of custom polymer optics in North America, has been certified to be in compliance with ISO 9001:2000. The certification audit was conducted by the Bureau Veritas Group. This recognition of Syntec's quality management system reinforces the company's credentials as a high precision manufacturer of injection molded polymer optics and opto-electronic assemblies. Syntec Optics integrates all steps of the process.

Want to Green Your Supply Chain? Start at the Bottom - With Your Pallets
Wed, 10 Jun 2009, 15:35:27 EDT — Edited by Carly Zander
VINELAND, N.J. (SEND2PRESS NEWSWIRE) -- Most people believe change starts at the top. But when it comes to greening your supply chain, change really starts at the bottom - with your choice of pallets. That's what Michael Smith, C.O.O. of PALNET, a nationwide supplier of environmentally-friendly wooden pallets, believes. And he should know, he's been in the pallet business for more than 20 years.

Precision Aerospace Components to Distribute High Tech Locking Washer
Mon, 08 Jun 2009, 17:37:32 EDT — Edited by Carly Zander
NEW YORK, N.Y. (SEND2PRESS NEWSWIRE) -- Precision Aerospace Components, Inc. (OTCBB:PAOS / PAOS.ob) has, through its subsidiary Tiger-Tight Corp., obtained the exclusive rights for the United States and Canada to distribute the full line of a proprietary locking washers to be produced by ESK Ceramics, of Germany, a subsidiary of Ceradyne Corp. (CRDN).

Pallet Buyers Need to be Aware of 'Voodoo' Environmental Claims, says PALNET USA
Wed, 20 May 2009, 17:35:09 EDT — Edited by Carly Zander
VINELAND, N.J., May 20 (SEND2PRESS NEWSWIRE) -- The pallet industry has begun to promote green and with that, environmental claims are sprouting up everywhere, cautions PALNET. A 2008 study conducted by Price Waterhouse found that consumers only believe 16 percent of environmental claims. There's a good reason why. Of 1,753 environmental claims researched last year, all but one were either false or misleading, according to the State of Green Business report.

Plastic or Wood Pallets: Which is Greener? Debunking the Environmental Myth of Plastic Pallets
Wed, 15 Apr 2009, 07:59:45 EDT — Edited by Debra Tone
VINELAND, N.J., April 15 (SEND2PRESS NEWSWIRE) -- Michael Smith, President and C.O.O. of PALNET, a leading nationwide supplier of shipping pallets, issued a statement today regarding the environmental impact of plastic versus wood pallets. According to Smith, 'For all the green rhetoric being tossed around today by the manufacturers of plastic pallets about their sustainability and recyclable nature, the facts are still the facts.'

Inventek Releases a SiRFstarIII(TM) 20 Channel OEM GPS Module with a True 5 Hz Update Rate
Mon, 30 Mar 2009, 18:00:13 EDT — Edited by Carly Zander
WESTFORD, Mass., March 30 (SEND2PRESS NEWSWIRE) -- Inventek Systems, the leading manufacturer of low cost, highly accurate OEM GPS modules, has developed a dual UART GPS with SiRF binary outputting position, velocity and time at 5 times per second without interpolation. Offering real time GPS updates, this compact 18 mm x 18 mm GPS module is ideal for high-velocity, high acceleration applications and is based on the SiRFstarIII(TM) architecture.

South Carolina's Lean Manufacturing Experts Offering X2Order's ForeSight
Mon, 23 Mar 2009, 11:58:51 EDT — Edited by Carly Zander
COLUMBIA, S.C., March 23 (SEND2PRESS NEWSWIRE) -- The South Carolina Manufacturing Extension Partnership (SCMEP) is making available to SC manufacturers an advanced productivity improvement solution that will be featured at next week's InnoVenture Southeast 2009 conference in Greenville. This solution, called ForeSight, a software-as a-service (SaaS) framework developed by X2Order, Inc., is the only application developed specifically to drive effective customer order fill rates.

Kawasaki Selects Stens, LLC for Canadian Distribution of Engines and Handheld Power Products
Tue, 20 Jan 2009, 06:00:13 EDT — Edited by Carly Zander
GRAND RAPIDS, Mich., Jan. 20 (SEND2PRESS NEWSWIRE) -- The Engines and Power Products Division of Kawasaki Motors Corp., U.S.A., will initiate a new distribution arrangement for Canada, effective this week. Stens, LLC, headquartered in Jasper, Ind., will become the distributor of Kawasaki-branded replacement engines and handheld power products to a network of more than 500 independent dealers in Canada.

LRM Industries, LLC(TM) to Produce Composite Railway Systems Components
Thu, 11 Dec 2008, 06:30:16 EDT — Edited by Debra Tone
ROCKLEDGE, Fla., Dec. 11 (SEND2PRESS NEWSWIRE) -- LRM Industries, LLC(TM), headquartered in Rockledge, Florida, has been selected by Eastern Rail Corporation to manufacture thermoplastic composite infrastructure components for the nation's electric railways. LRM's proprietary, totally automated TPF ThermoPlastic Flowforming(TM) process will be used to mold long fiber reinforced thermoplastic composite components for a durable replacement of aging or damaged railway structures made of wood, steel or traditional fiberglass.

Philatron International Awarded 2008 Medium Size Family Owned Business of the Year
Thu, 04 Dec 2008, 17:12:16 EDT — Edited by Carly Zander
ORANGE COUNTY, Calif., Dec. 4 (SEND2PRESS NEWSWIRE) -- Philatron International and CEO, Founder, and Owner, Phillip M. Ramos, Jr. were honored with yet another award for its outstanding business. On November 19th, Orange County Business Journal (OCBJ) awarded Philatron International, Medium Size Family Owned Business of the year. During the 9th annual business award ceremony OCBJ recognized the company for its commitment to helping outside community organizations through charity.

LRM Industries, LLC Launches New Sheetless Thermoforming Production
Tue, 28 Oct 2008, 05:50:15 EDT — Edited by Carly Zander
ROCKLEDGE, Fla., Oct. 28 (SEND2PRESS NEWSWIRE) -- LRM Industries, LLC, headquartered in Rockledge, Florida, announces a new innovative production line, custom designed for the unique, patent-pending STF Sheetless ThermoForming(TM) technology, which was invented by LRM in 2007.

Wordingham Technologies Adds Online Support for Supply Chain Management
Wed, 30 Jul 2008, 13:04:04 EDT — Edited by Carly Zander
ROCHESTER, N.Y., July 30 (SEND2PRESS NEWSWIRE) -- Wordingham Technologies, specialists in custom machined parts for optics, photonics and precision instrumentation, announces online customer access for tracking orders and managing releases, 24/7. The Wordingham Quality (WQ) Portal, the first of its kind in this industry, demonstrates Wordingham's commitment to 'quality delivered.'

LRM Industries, LLC Launches New Web Site
Fri, 28 Mar 2008, 01:05:37 EDT — Edited by Carly Zander
ROCKLEDGE, Fla., March 28 (SEND2PRESS NEWSWIRE) -- LRM Industries, LLC, a manufacturer of large plastic and composite structures headquartered in Rockledge, Florida, announces the launch of a new website. The site has a new design and new content, reflecting the expanding offering of LRM's rapidly growing portfolio of technology and products to improve the competitiveness, utility and versatility of large plastic structures in many markets.

F and M Tool and Plastics Announces Opening of Smartware Products Division
Tue, 18 Mar 2008, 11:09:15 EDT — Edited by Carly Zander
FRESNO, Calif., March 18 (SEND2PRESS NEWSWIRE) -- F & M Tool and Plastics Inc., in Leominster Mass., a molding firm specializing in manufacturing eco friendly products, has announced the opening of Smartware Products, a division of F & M Tool and Plastics, a sales and distribution center in the Central Valley of California.

TJ's Custom Jeans announces the Move of Their State of the Art Manufacturing Facility and Customer Service Center
Thu, 13 Mar 2008, 09:55:58 EDT — Edited by Carly Zander
PARRAS, COAHUILA, Mexico, March 13 (SEND2PRESS NEWSWIRE) -- TJ's Custom Jeans (Tailormade Jeanswear Ltd.), the global leader in made-to-measure jeans and chinos, has relocated their facilities to Parras, Mexico. The choice of move to Parras de la Fuenta is significant in that the town which is considered an oasis in the desert has 2 premium quality denim mills and boasts a 100 year old history of weaving denim fabric and sewing jeans.

Bantam Electronics(SM) Adds Engineering Design and NPI Services, Increasing Focus on Accelerating Customer Time to Market
Fri, 14 Dec 2007, 09:29:22 EDT — Edited by Carly Zander
AUSTIN, Texas - Dec. 14 (SEND2PRESS NEWSWIRE) -- Bantam Electronics, Inc., a leading provider of high mix electronics manufacturing services, including custom systems manufacturing and supply chain management for emerging OEM companies and electronic products, today announced the addition of engineering design and new product integration (NPI) services to its customer offering.

Bantam Recognized in 2007 Inc. 5000
Mon, 05 Nov 2007, 12:34:22 EDT — Edited by Carly Zander
NEW YORK, N.Y. and AUSTIN, Texas - Nov. 5 (SEND2PRESS NEWSWIRE) -- Inc. recognized Bantam Electronics, Inc., a leading provider of high mix electronics manufacturing services for emerging companies, on its inaugural Inc. 5,000 list of the fastest-growing private companies in the country. The Inc. 5,000, an extension of Inc. magazine's annual Inc. 500 list, catches many businesses that are too big to grow at the pace required to make the Inc. 500.

Advantage Trim and Lumber Company Announces the Release of Tigerwood Decking
Tue, 18 Sep 2007, 18:05:00 EDT — Edited by Carly Zander
BUFFALO, N.Y. (SEND2PRESS NEWSWIRE) -- Advantage Trim & Lumber today announced the release of Tigerwood Decking to finally give homeowners a low maintenance and long life deck material at a cheaper price than other hardwoods like Ipe. Tigerwood Decking gives homeowners an exotic hardwood deck that will last 25 years or longer.

Electronic Development Solutions Announces an Advancement in Sidewall Pinhole Detection for Formed Foils Used in Pharmaceutical, Medical and Food Packaging
Tue, 10 Oct 2006, 19:36:00 EDT — Edited by Christopher Simmons
TAMPA, Fla. - Oct. 10 (SEND2PRESS NEWSWIRE) -- Electronic Development Solutions, Inc announces the latest version of its Alumivision pinhole detector line. The Alumivision MDA provides sidewall pinhole inspection of formed cavities and reduces material waste when compared to conventional systems.

New Partnership, Bantam Electronics(SM) Assumes Operational Hardware Manufacturing for Acequia
Wed, 05 Jul 2006, 20:33:00 EDT — Edited by Christopher L. Simmons
AUSTIN, TX - July 5 (SEND2PRESS NEWSWIRE) -- Bantam Electronics, Inc. a leading provider of custom manufacturing solutions for OEMs, as well as end-to-end supply chain services, today announced its strategic partnership with Acequia, L.P. Acequia is a leading provider of irrigation water conservation solutions to local and nationally based commercial property owners.

Kubota Research Announces P-Wave(TM) MemBond(TM) and Collaborates with Ion Power, Inc. to Accelerate Fuel Cell Research
Thu, 04 May 2006, 07:00:00 EDT — Edited by Christopher Laird Simmons
HOCKESSIN, DE - May 4 (SEND2PRESS NEWSWIRE) -- Kubota Research Associates, Inc., headquartered in Hockessin, Delaware, announces P-Wave(TM) MemBond(TM), a revolutionary waterproof bonding process for the assembly of fuel cells, based upon the patented P-Wave(TM) technology, which clears major performance and cost obstacles to the manufacture of commercially viable fuel cells.

Syntec Expands Optical Diamond Turning Center to Give Defense Clients New Options
Mon, 17 Apr 2006, 17:27:00 EDT — Edited by Debra Tone
PAVILION, NY - Apr. 17 (SEND2PRESS NEWSWIRE) -- Syntec Technologies, the largest independent custom plastic optics manufacturer in the US, has added a state-of the-art Nanotech 250 Diamond Turning Lathe at its wholly owned subsidiary, Rochester Tool and Mold. Rochester Tool and Mold is one of very few facilities worldwide with expertise in both opaque and optical molds. As an integral part of delivering this expertise, it offers full single point diamond turning as well as HRDT(TM), its patent-pending process for high refraction diamond turning.

Bantam Electronics(SM) And Crossroads(TM) Systems Form Strategic Partnership
Mon, 27 Mar 2006, 22:08:00 EDT — Edited by Christopher Laird Simmons
AUSTIN, TX - Mar. 27 (SEND2PRESS NEWSWIRE) -- Bantam Electronics, Inc. a leading provider of custom computer, server, data storage and embedded appliance manufacturing, as well as end-to-end supply chain services, today announced its strategic partnership with Crossroads Systems, Inc. Crossroads is a leading provider of Business Information Assurance (BIA) solutions and, per its heritage, is also recognized as a storage devices market leader producing enterprise-class, high-performance and high-reliability storage routing devices.

ASAME Technology LLC Obtains Exclusive Distribution License for Materials Research and Manufacturing Engineering Tool
Thu, 15 Sep 2005, 17:32:00 EDT — Edited by Carly Zander
CEDAR PARK, TX - September 15 (SEND2PRESS NEWSWIRE) -- ASAME Technology LLC holds an exclusive license to market, distribute, and support the patented Automated Surface Strain Analysis and Measurement Environment (ASAME). ASAME Technology sells and supports two well-known surface strain measurement technologies: the ASAME Target Model and the Grid Pattern Analyzer (GPA). Currently there are more than 100 ASAME and/or GPA users around the world.

Multiject and Plasdan Team Up in North America
Mon, 22 Aug 2005, 20:09:00 EDT — Edited by Carly Zander
ROCHESTER, Mich. - August 22 (SEND2PRESS NEWSWIRE) -- Multiject LLC has signed an agreement to represent Plasdan Group, an international supplier of machinery and tooling for the plastic injection molding industry. This relationship is effective immediately, and affects all of Plasdan's injection molding machinery business in North America.

New HRDT Technology Cuts Development Costs for High Refraction Polymer Optics
Thu, 07 Apr 2005, 00:09:00 EDT — Edited by Carly Zander
PAVILION, NY -- (SEND2PRESS NEWSWIRE) -- Syntec Technologies, a leading manufacturer of custom polymer optics, announces patent-pending HRDT(tm) technology that cuts costs by up to 5X for optics applications requiring high refraction, heat resistant, NIR performance. HRDT, or high refraction diamond turning, enables direct diamond turning of polymers such as Ultem(tm) to a surface as smooth as 60 angstroms, critical in meeting many telecom, defense and biometric performance demands.