LRM Industries Introduces EverDock - A Simple, Green Dock Building Solution

| From
EverDock modular dock panels

ROCKLEDGE, Fla. (SEND2PRESS NEWSWIRE) -- LRM Industries International, Inc. headquartered in Rockledge, Florida, announces the introduction of EverDock™ modular dock panels, the first product in family of innovative and environmentally friendly thermoplastic marine dock solutions. LRM will show EverDock™ panels for first time from February 11th through the 15th at The Miami International Boat Show 2010.

The 2 ft. long by 4 ft. wide EverDock™ panels replace treated wood or synthetic lumber board decking used today with a tough, durable panel, which has integrated structural support. EverDock™ panels have a 5 in. deep rib structure underneath, eliminating the need for, and expense of, stringers commonly used by existing flat-panel decking products. Also, the panels can be easily removed for storage during winter months.

The installation of EverDock™ panels is fast and simple. The panels drop onto existing framing joists and are attached with lag screws -- that's it -- you now have a beautiful dock that will not rot, splinter or warp. No maintenance is required for breakthrough longevity and attractiveness.

The surface of an EverDock™ panel is grained and lightly ridged to provide anti-slip characteristics, and they are slotted to allow sunlight to pass through to the marine habitat below. This slotting and a slightly crowned surface keep an EverDock™ dock free of standing water.

Initially offered standard in beige and light gray, with minimum quantity orders EverDock™ panels may be custom-ordered in other pastel colors, which are easy on the bare feet in the hot sun. Accent your environment with an aqua, light green or white marine dock, which is uniform in color, attractive and the envy of the neighborhood!

Said Jim Callough, CEO of LRM Industries International, Inc., "Our EverDock family of products will leverage our unique, patented TPF ThermoPlastic Flowforming technology. No technology in the world can produce large, feature-rich products like TPF can. This is also a 'green building' product. At LRM we use no VOC emitting materials in the manufacture of our products and we are closed-loop in terms of recyclability ... we have no plastic waste and use consumer and industrial recycled content in our products."

At The Miami International Boat Show in booth #3009, LRM will exhibit the EverDock™ modular dock panel as the first product in the new family of marine dock solutions.

Company Information:

LRM Industries International, Inc. was established to commercialize TPF ThermoPlastic Flowforming™ technology, a radically different and award-winning process technology for producing large, feature-rich, long-fiber reinforced thermoplastic composite parts in one fully automated molding operation. With the TPF ThermoPlastic Flowforming™ and STF Sheetless ThermoForming™ technologies, LRM enables innovative applications and designs in the use of plastics and thermoplastic composites to produce very large unitary structures where, to-date, it has been viewed as cost prohibitive or lacking in strength and structural integrity.

For more information, visit .

Media Contact:
Jim Callough
of LRM Industries International, Inc.

News Source:
Like, Share, Save this press release:
  TWEET   SHARE   G+   PIN IT   STUMBLE   LinkedIn   Instapaper   Buffer

The content of the above press release was provided by the “news source” (LRM Industries International, Inc.) or authorized agency, who is solely responsible for its accuracy. Send2Press® is the originating wire service for this story and content is Copr. © 2010 LRM Industries International, Inc. with newswire version Copr. © 2010 Send2Press (a service of Neotrope). All trademarks acknowledged.

Rights granted for reproduction by any legitimate news organization. However, if news is cloned/scraped verbatim, then original attribution must be maintained with link back to this page as “original syndication source.” Resale of this content for commercial purposes is prohibited without a license. Reproduction on any site selling a competitive service is also prohibited. Information is believed accurate, as provided by news source or authorized agency, however is not guaranteed, and you assume all risk for use of any information found herein/hereupon. This work is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported License.
STORY READS for this single page only, as of Oct 22 2016:
[ count retired 8.4.16 ]

back to top
REFERENCES: EverDock modular dock panels, Miami International Boat Show, Miami International Boat Show 2010, LRM Industries International Inc, EverDock modular dock panels, CEO Jim Callough, replace treated wood or synthetic lumber board decking, environmentally friendly thermoplastic marine dock solutions, TPF ThermoPlastic Flowforming, STF Sheetless ThermoForming technologies, news, press release from LRM Industries International, Inc., Feb 9, 2010, Boating, Marine and Maritime, Business, , Rockledge, Florida, LRM Industries Introduces EverDock - A Simple, Green Dock Building Solution